 |
| Samsung SM-G977U Galaxy S10 5G Combination Firmware File |
SM_G930F U4 eight.0 Root
Repair IMEI
without losing the network
the way to Flash
Download the relevant USB driver for your Samsung device.
Download the flash tool Odin on your phone.
Now, transfer the relevant ADB change File for your device.
Open the Odin software package then select ADB change get in “AP” from the Box.
Turn on USB debugging mode on your phone.
Now, connect your mobile and laptop with a USB cable.
Open the ADB change tool and click on on the beginning. After that, your device can begin rebooting.
Disconnect the USB cable.
Select language English once your phone activates. After that, click next.
Now activate Wi-Fi or mobile knowledge.
After that, agree on the agreements and click on on next. they'll raise you to verify your account.
Now, connect your mobile and laptop once more..
You will see some info concerning your mobile and therefore the software package.
Click on take away FRP. The lock are removed during a short time.
Congratulations, you have got with success bypassed the FRP lock.
right-click to "Open as Administrator"
Follow these steps to enter transfer Mode/Odin Mode
Power off your device
Press and hold Volume Down key, key and Power Key
When your device vibrates, unharness Power key whereas keep holding the amount Down key and therefore the key
Press Volume Up key to enter transfer mode, that encompasses a inexperienced mechanism figure and “Downloading… don't close up target!!)
Your device ought to be mechanically recognized by Odin. At the lower-left of Odin interface, it ought to show a message that claims "Added!" and within the in the meantime, you ought to see a blueish box at the ID: COM section stating "COM:3" (the variety looking on that USB port you have got blocked the device cable and is irrelevant).
Whether it's "PDA" or "AP" depends on the version of Odin that you just used. however the md5 file goes to either BL"AP"CP"CSC
After adding the file, click "Start" to start the flashing method
Click "Start" to flash.
DO NOT take away OR care for YOUR DEVICE till FINISHED OR unsuccessful IS SHOWED ON Odin.
When the flashing method is completed and if everything goes well, you ought to see an enormous inexperienced box speech "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device ought to be rebooted and it's safe to remove/unplug your device
Flash succeeded
Download Link:: Link
In this website you get all kind stock rom(flash files)100% tested plz subscribe us.
thanks for comment ConversionConversion EmoticonEmoticon