Huawei P8 Lite (ALE-TL00) Tested Flash File Free 100% Tested Free Download



Huawei P8 Lite (ALE-TL00) Tested Flash File Free 100% Tested Free Download
Huawei P8 Lite (ALE-TL00) Tested Flash File Free 100% Tested Free Download


1 form prerequisites 

1.1 Historical form data table. 

The accompanying forms can be moved up to this rendition 

Beer TL00 V100R001C01B131 

1.2 Upgrade Environment Requirements 

Relevant to cell phone programming, need to utilize MICRO SD card to overhaul 

1.3 List of redesign records 

Document Name 

Enormous bundle way dload\UPDATE.APP 

2 Upgrade planning 

2.1 Checking whether the update condition meets the necessities 

Check if the MICRO SD card can be perused or composed. 

2.2 Obtaining/Checking Upgrade Packages 

The index structure is equivalent to: dload\UPDATE.APP 

3 Upgrade directions 

There are two redesign strategies: constrained update and typical overhaul. 

Constrained redesign isn't required to boot, so it is appropriate for use when it can't boot regularly (counting unfit to boot, no 

The strategy enters the backup interface, and so forth.). The ordinary redesign requires control on and can enter the setup module. 

4 update task 

4.1 Normal update (favored overhaul technique) 

4.1.1 Upgrading huge packs 

Stage 1: Prepare a SD card. It is prescribed to utilize Sandisk, Kingstone, or Kingmax. The size is suggested at 2G. 

the abovementioned. 

Stage 2: Format the SD card (discretionary). 

Stage 3: Copy the UPDATE.APP under the enormous bundle way to the SD card dload\UPDATE.APP. 

Stage 4: Check if there is dload\UPDATE.APP in the root index of the SD card. 

Stage 5: Insert the SD card into the telephone to boot, and go to Settings - > System Update - > Local Upgrade - > SD Card Upgrade on the primary screen. 

To back up your information, select Back up your information; at that point, begin the redesign. 

Stage 6: The advancement procedure has an advancement bar show. After the advancement bar is done, the cell phone naturally restarts. 

4.2 Forced update 

4.2.1 Upgrading huge packs 

Stage 1: Prepare a SD card. It is prescribed to utilize Sandisk, Kingstone, or Kingmax. The size is suggested at 2G. 

the abovementioned. 

Stage 2: Format the SD card (discretionary). 

Stage 3: Copy the UPDATE.APP under the enormous bundle way to the SD card dload\UPDATE.APP. 

Stage 4: Check if there is dload\UPDATE.APP in the root catalog of the SD card. 

Stage 4: When the cell phone is killed, embed the SD card, and press the volume up catch + volume down catch + switch catch, hand 

The machine consequently enters the overhaul mode and afterward begins the redesign, as appeared in the figure: 

Stage 5: After the advancement bar is full, the telephone will restart consequently. If not, if you don't mind expel the battery physically. 

Download Link :: Link



Previous
Next Post »

thanks for comment ConversionConversion EmoticonEmoticon