Huawei Y210S (C8685) Tested Flash File Free 100% Tested Free Download ~ All Gsm Stock Rom

Huawei Y210S (C8685) Tested Flash File Free 100% Tested Free Download

1 rendition necessities

1.1 Historical rendition data table.

The accompanying variants can be moved up to this rendition

Y210S_MMUGC8685_Android 2.3_V100R001C92B824_05011GXL

1.2 Upgrade Environment Requirements

Appropriate to cell phone programming, need to utilize MICRO SD card to overhaul

1.3 List of redesign documents

Document Name

Enormous bundle way dload\UPDATE.APP

2 Upgrade planning

2.1 Checking whether the update condition meets the prerequisites

Check if the MICRO SD card can be perused or composed.

2.2 Obtaining/Checking Upgrade Packages

The index structure is equivalent to: dload\UPDATE.APP

3 Upgrade directions

There are two redesign strategies: constrained overhaul and typical update.

Constrained redesign isn't required to boot, so it is appropriate for use when it can't boot typically (counting unfit to boot, no

The technique enters the reserve interface, and so on.). The ordinary redesign requires control on and can enter the setup module.

4 update activity

4.1 Normal update (favored redesign strategy)

4.1.1 Upgrading huge sacks

Stage 1: Prepare a SD card. It is prescribed to utilize Sandisk, Kingstone, or Kingmax. The size is suggested at 2G.

the abovementioned.

Stage 2: Format the SD card (discretionary).

Stage 3: Copy the UPDATE.APP under the enormous bundle way to the SD card dload\UPDATE.APP.

Stage 4: Check if there is dload\UPDATE.APP in the root registry of the SD card.

Stage 5: Insert the SD card into the telephone to boot, and go to Settings - > System Update - > Local Upgrade - > SD Card Upgrade on the fundamental screen.

To back up your information, select Back up your information; at that point, begin the update.

Stage 6: The advancement procedure has an advancement bar show. After the advancement bar is done, the cell phone consequently restarts.

4.2 Forced update

4.2.1 Upgrading huge sacks

Stage 1: Prepare a SD card. It is prescribed to utilize Sandisk, Kingstone, or Kingmax. The size is prescribed at 2G.

the abovementioned.

Stage 2: Format the SD card (discretionary).

Stage 3: Copy the UPDATE.APP under the enormous bundle way to the SD card dload\UPDATE.APP.

Stage 4: Check if there is dload\UPDATE.APP in the root index of the SD card.

Stage 4: When the cell phone is killed, embed the SD card, and press the volume up catch + volume down catch + switch catch, hand

The machine consequently enters the update mode and afterward begins the redesign, as appeared in the figure:

Stage 5: After the advancement bar is full, the telephone will restart consequently. If not, if it's not too much trouble expel the battery physically.

Download Link :: Link