Huawei P8 Young ALE-UL00 Tested Flash File Free 100% Tested Free Download ~ All Gsm Stock Rom

Huawei P8 Young ALE-UL00 Tested Flash File Free 100% Tested Free Download

1 variant prerequisites

1.1 Historical variant data table.

The accompanying adaptations can be moved up to this form

Beer UL00_Android 5.0_Emotion UI 3.1_V100R001C00B121_China Unicom

1.2 Upgrade Environment Requirements

Appropriate to cell phone programming, need to utilize MICRO SD card to redesign

1.3 List of redesign documents

Document Name

Enormous bundle way dload\UPDATE.APP

2 Upgrade readiness

2.1 Checking whether the overhaul condition meets the necessities

Check if the MICRO SD card can be perused or composed.

2.2 Obtaining/Checking Upgrade Packages

The index structure is equivalent to: dload\UPDATE.APP

3 Upgrade directions

There are two redesign techniques: constrained update and ordinary overhaul.

Constrained redesign isn't required to boot, so it is reasonable for use when it can't boot regularly (counting unfit to boot, no

The strategy enters the reserve interface, and so on.). The typical redesign requires control on and can enter the setup module.

4 overhaul task

4.1 Normal overhaul (favored update strategy)

4.1.1 Upgrading huge packs

Stage 1: Prepare a SD card. It is prescribed to utilize Sandisk, Kingstone, or Kingmax. The size is suggested at 2G.

the abovementioned.

Stage 2: Format the SD card (discretionary).

Stage 3: Copy the UPDATE.APP under the enormous bundle way to the SD card dload\UPDATE.APP.

Stage 4: Check if there is dload\UPDATE.APP in the root catalog of the SD card.

Stage 5: Insert the SD card into the telephone to boot, and go to Settings - > System Update - > Local Upgrade - > SD Card Upgrade on the principle screen.

To back up your information, select Back up your information; at that point, begin the overhaul.

Stage 6: The advancement procedure has an advancement bar show. After the advancement bar is done, the cell phone consequently restarts.

4.2 Forced redesign

4.2.1 Upgrading enormous sacks

Stage 1: Prepare a SD card. It is prescribed to utilize Sandisk, Kingstone, or Kingmax. The size is prescribed at 2G.

the abovementioned.

Stage 2: Format the SD card (discretionary).

Stage 3: Copy the UPDATE.APP under the huge bundle way to the SD card dload\UPDATE.APP.

Stage 4: Check if there is dload\UPDATE.APP in the root registry of the SD card.

Stage 4: When the cell phone is killed, embed the SD card, and press the volume up catch + volume down catch + switch catch, hand

The machine naturally enters the overhaul mode and after that begins the redesign, as appeared in the figure:

Stage 5: After the advancement bar is full, the telephone will restart naturally. If not, it would be ideal if you evacuate the battery physically.

Brew UL00_Android 5.0_Emotion UI 3.1_V100R001C00B121_China Unicom

Download Link :: Link