Huawei Y541-U02 Stock Firmware ROM Tested Flash File Free 100% Tested Free Download ~ All Gsm Stock Rom

Huawei Y541-U02 Stock Firmware ROM Tested Flash File Free 100% Tested Free Download

1 variant prerequisites

1.1 Historical rendition data table.

The accompanying renditions can be moved up to this form

Y541-U02_V100R001C567B114

1.2 Upgrade Environment Requirements

Pertinent to cell phone programming, need to utilize MICRO SD card to redesign

1.3 List of update documents

Record Name

Huge bundle way dload\UPDATE.APP

2 Upgrade arrangement

2.1 Checking whether the redesign condition meets the prerequisites

Check if the MICRO SD card can be perused or composed.

2.2 Obtaining/Checking Upgrade Packages

The registry structure is equivalent to: dload\UPDATE.APP

3 Upgrade guidelines

There are two update strategies: constrained redesign and typical overhaul.

Constrained update isn't required to boot, so it is appropriate for use when it can't boot typically (counting unfit to boot, no

The technique enters the backup interface, and so forth.). The typical overhaul requires control on and can enter the setup module.

4 redesign task

4.1 Normal redesign (favored update strategy)

4.1.1 Upgrading enormous packs

Stage 1: Prepare a SD card. It is prescribed to utilize Sandisk, Kingstone, or Kingmax. The size is prescribed at 2G.

the abovementioned.

Stage 2: Format the SD card (discretionary).

Stage 3: Copy the UPDATE.APP under the huge bundle way to the SD card dload\UPDATE.APP.

Stage 4: Check if there is dload\UPDATE.APP in the root index of the SD card.

Stage 5: Insert the SD card into the telephone to boot, and go to Settings - > System Update - > Local Upgrade - > SD Card Upgrade on the principle screen.

To back up your information, select Back up your information; at that point, begin the overhaul.

Stage 6: The advancement procedure has an advancement bar show. After the advancement bar is done, the cell phone naturally restarts.

4.2 Forced update

4.2.1 Upgrading huge packs

Stage 1: Prepare a SD card. It is prescribed to utilize Sandisk, Kingstone, or Kingmax. The size is suggested at 2G.

the abovementioned.

Stage 2: Format the SD card (discretionary).

Stage 3: Copy the UPDATE.APP under the enormous bundle way to the SD card dload\UPDATE.APP.

Stage 4: Check if there is dload\UPDATE.APP in the root catalog of the SD card.

Stage 4: When the cell phone is killed, embed the SD card, and press the volume up catch + volume down catch + switch catch, hand

The machine consequently enters the update mode and afterward begins the redesign, as appeared in the figure:

Y541-U02_V100R001C567B114

Download Link :: Link