Huawei ShotX ATH-UL01 Tested Flash File Free 100% Tested Free Download ~ All Gsm Stock Rom

Huawei ShotX ATH-UL01 Tested Flash File Free 100% Tested Free Download

1 variant prerequisites

1.1 Historical variant data table.

The accompanying variants can be moved up to this form

Huawei_ShotX_ATH-UL01_Android 5.1.1_EMUI 3.1_C00B132_Kenya_general

1.2 Upgrade Environment Requirements

Material to cell phone programming, need to utilize MICRO SD card to redesign

1.3 List of update documents

Record Name

Enormous bundle way dload\UPDATE.APP

2 Upgrade readiness

2.1 Checking whether the redesign condition meets the prerequisites

Check if the MICRO SD card can be perused or composed.

2.2 Obtaining/Checking Upgrade Packages

The catalog structure is equivalent to: dload\UPDATE.APP

3 Upgrade guidelines

There are two overhaul techniques: constrained update and ordinary redesign.

Constrained overhaul isn't required to boot, so it is reasonable for use when it can't boot regularly (counting unfit to boot, no

The technique enters the reserve interface, and so forth.). The typical redesign requires control on and can enter the setup module.

4 overhaul activity

4.1 Normal overhaul (favored redesign technique)

4.1.1 Upgrading huge sacks

Stage 1: Prepare a SD card. It is prescribed to utilize Sandisk, Kingstone, or Kingmax. The size is prescribed at 2G.

the abovementioned.

Stage 2: Format the SD card (discretionary).

Stage 3: Copy the UPDATE.APP under the huge bundle way to the SD card dload\UPDATE.APP.

Stage 4: Check if there is dload\UPDATE.APP in the root registry of the SD card.

Stage 5: Insert the SD card into the telephone to boot, and go to Settings - > System Update - > Local Upgrade - > SD Card Upgrade on the primary screen.

To back up your information, select Back up your information; at that point, begin the overhaul.

Stage 6: The advancement procedure has an advancement bar show. After the advancement bar is done, the cell phone consequently restarts.

4.2 Forced redesign

4.2.1 Upgrading enormous sacks

Stage 1: Prepare a SD card. It is prescribed to utilize Sandisk, Kingstone, or Kingmax. The size is suggested at 2G.

the abovementioned.

Stage 2: Format the SD card (discretionary).

Stage 3: Copy the UPDATE.APP under the enormous bundle way to the SD card dload\UPDATE.APP.

Stage 4: Check if there is dload\UPDATE.APP in the root registry of the SD card.

Stage 4: When the cell phone is killed, embed the SD card, and press the volume up catch + volume down catch + switch catch, hand

The machine consequently enters the redesign mode and after that begins the overhaul, as appeared in the figure:

Stage 5: After the advancement bar is full, the telephone will restart consequently. If not, it would be ideal if you evacuate the battery physically.

Huawei_ShotX_ATH-UL01_Android 5.1.1_EMUI 3.1_C00B132_Kenya_general

Download Link :: Link